If you have a different brand router these plans will have to be modified. The plans we currently have are for the 7529 porter cable plunge router.
First, attach the alignment board square with the edge guide.
Router edge guide diy. Woodworking plans for making a simple accessory. In order for the router jig to slide over the track saw guide, there is a slot needed that fits perfectly over the edge of the guide. In this video, i am building a router edge guide that won’t break the bank.
If you have access to a large, industrial planer. Simply remove the base plate, mark the mounting holes, drill, and attach. Router tables are basically a table base where you can attach a router upside down so that the router bit sticks up out of the table.
It generally takes about 5 minutes for the automatic email to arrive from verysupercool tools containing the downloadable link. I have a project coming up where i am going to be routing a bunch of straight lines. Buy a bit that matches the desired dado width so you can make the cut in one pass.
I should have bought the router there just to get the guide but dont need 2 routers, and the cost for the router and guide in poland was $123 us, way too much money. That’s acceptable though as the edge guide wasn’t a universal edge guide. Easy diy router edge guide.
If you modify these plans for another router, we would. In many of my past live edge woodworking videos, i demonstrate how you can level out an uneven piece of wood…sometimes very large pieces of wood…with a routing sled as one of the first steps to getting it ready for a project. You now have an exact reference point for all your cuts.
To make my life easier, i decided to make this super simple jig! Using the removed base plate as a guide i set the distance for the width of my cut on the table saw, by placing the router plate to the inside edge of the blade and setting my fence at the point it make contact with the plate on the opposing side and locked down my fence i then made my cut. Rated 5.00 out of 5 based on 2 customer ratings.
Features an easy slide and lock positioning adjustment. I’m going to make the base out of 1/2″ mdo and the fence i’ll either use mdo or maybe a piece of hardwood if i’ve got a scrap kicking around. That’s an easy fix with a router and a diy router sled that you can use to level pretty much any sized piece of material.
By patrick in november 25, 2017. Have the necessary tools for this diy project lined up before you start—you’ll save time and frustration. Like a table saw…but for a router.
The edgerouter x is ubiquiti’s entry level router that caters to the soho, small office / home office, community. Then position your router against the edge guide and rout a dado across the guide board. First insert the steel rods into the slots in the router base that usually hold an edge guide.
This style edge guide i made features an adjustable edge guide and can be adapted to any router with a removable base plate. Alright… let’s get to the meat of this. It makes one heck of a mess but is oh so worth it!
This router edge guide is also equipped with dual sliding and lockable mounts to make operating it quite easy for users. Otherwise, it is perfect for doing dados. Required tools for this router edge guide.
I came up with a set of plans to go along with this project so anyone. You might, however, find the edge guide a little awkward to use because of its length. With an msrp of $49.99, 5 gigabit rj45 ports, all.
Wood screws, using a carpenter’s square to keep the jig perfectly square during assembly. Once i get this built i’ll start putting rabbits in all the 1×6 stock. ( 4 customer reviews) $ 5.00 $ 3.50.
The edge guide travels over your work piece and along a straight edge, this will guide the router bit to trim a straight edge on the opposite side of the work. The dnp618 edge guide for fixed base compact router quickly attaches to a fixed base compact router and allows for precise positioning of inlays, dadoes, and more. This jig takes less than 10 minutes to make and it will be such a time saver in the future!
To make this slot, place the jig next to the guide and place a piece of wood in the guide at the same height. To complete the building of the jig, install a router bit into the router, set the depth of cut to a bit stronger than the hardboard or plywood, then with the router base running against the fence, make a cut. Well today i found a simple do it yourself router edge guide that i could make myself.
I can’t say much about router tables as i don’t personally have one. Either measure the distance from the edge of the router bit to the inside edge of the fence, or set the fence distance by hand by placing the fence over the piece you wish to cut. Just line up the dado in the alignment board with the marks on your workpiece.
For the base i used 1/4 inch thick plywood. So you bought a live edge slab or made a cutting board that’s too big for your thickness planer?